Industrial 10/100/1000M fiber switch

Overview

· Applicable to enterprise networks planning to expand 10M to 1000M bandwidth
· Comprehensive data transmission network for multimedia such as images and voice

NT-IN321BF Industrial Gigabit Ethernet Switch series is an industrial-standard 3-port Gigabit switch with dual fiber port redundancy, providing 1-port 10/100/1000BASE-TX Ethernet ports and additional one 100/ 1000Base-FX fiber ports. Rigorous industrial design makes it stable and reliable with basic protection, as well as flexible enough for Ethernet expansion in harsh industrial environments.

· Suitable for occasions requiring point-to-point computer signal transmission
· Widely used in computer data transmission network to meet various business needs

When the main fiber broke down, NT-IN321BF Industrial 10/100/1000M fiber switch can switch to redundant fiber within 1ms.

· Suitable for broadband campus network, broadband cable TV network and intelligent community fiber to the building, fiber to the home
Data transmission

NT-IN321BF Industrial Ethernet Switch series is either rack-mountable with DIN rail or panel mounted in cabinet for easy installation. Wide range of working temperature, power supply backup, IP40 protection, LED indicators and compact design, all these make NT-IN321BF Industrial 10/100/1000M fiber switch a perfect solution for special industrial application site.

· It can be combined with computer network equipment such as switches to form: chain, star, ring network and other calculations
Machine network
Technical specifications

NT-IN321BF-AT (AF) Industrial Network Switch series is the POE version of NT-IN321BF with two POE Ethernet ports, powering POE IP camera, AP and IP phone over Ethernet cable. NT-IN321BF-AT (AF) supports IEEE802.3at with 25.5W output, compatible with IEEE802.3af.

Features

1. Dual fiber port redundancy available with DIP switch
2. Built-in efficient switching core to implement flow control and reduce broadcast packets
3. Protocol supported: IEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, IEEE802.3z
4. 1000Base-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE
5. 10/100/1000Base-TX can automatically identify the direct line and cross-line, is compatible with various cards,
6. switches, HUB and other Ethernet devices
7. Take store-and-forward mechanism to avoid packet loss and error frames
8. Provide four independent 10M/100Mbps/1000Mbps self-adaptive twisted pair ports; realize Ethernet port
9. redundancy and multiple users access.
10. This Industrial Switch Support up to 1536 bytes packet.
11. Support full-duplex flow control / half-duplex back pressure mode
12. 12V--48V DC or 24V AC power supply input, redundant power and reverse polarity protection
13. -40 to 80℃ operating temperature to meet a variety of complex environment
14. IP40 standard protection housing.
15. Supports ESD protection at Ethernet port and EFT protection.
16. Easy installation, DIN rail or panel mountable.
17. Dual fiber multi mode, single mode and WDM single mode fiber compatible.
18. Support POE power supply up to 25.5W (optional)
19. 12 Gbps back plane bandwidth, 1 k MAC address automatic learning and 512kb internal cache for data buffer

Specification

Parameter	Specification
Design Level	Industrial IP40 design standards
Access mode	10/100/1000Mbps
Protocols	IEEE802.3 10Base-T,IEEE802.3u 100Base-TX,IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX,IEEE802.3x Flow Control.IEEE802.3at PSE
Wavelength	850nm/1310nm/1550nm
Transmission distance	Dual-fiber multi-mode:500m Single fiber single mode: 20/40/60/80/100km Dual-fiber single mode:20/40/60/80/100km Category-5 twisted pairs: 100m EIA 568A/B
Port	1 RJ45 ports: Connecting STP/UTP category-5 twisted pairs, EIA568A/B 2 optical ports: Multi-mode :SC/FC/LC/ST(50/125, 62.5/125μm) Single mode : SC/FC/LC/ST (9/125μm)
Conversion	Store and Forward
MAC	1K
Buffer space	512Kb
Flow control	Full duplex: flow control; Half duplex: back pressure
Time-delay	Store and Forward: max. 9.6μs
BER	<10-9
MTBF	50,000 hours
LED indicator	Power Supply : PWR 1,PWR 2 POE at UTP port: POE1 Fiber Port: F1,F2
Power supply	Power Input Range: 12 ~ 48VDC/24VAC , 6-PIN Terminals, Redundant dual power
Power consumption	<5W (without PSE function)
Storage humidity	5%~90% non-condensing
Operating humidity	5%~90% non-condensing

Parameter	Specification
Operating temperature	-40~80℃
Storage Temperature	-40~80℃
Dimension	140mm(D)×110mm(W)×40mm(H)
Weight

Certification

EMI	FCC Part 15, CISPR (EN55022) class A
EMC	FCC,CE
EMS	EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 3 EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4 EN61000-4-6 (CS), Level 3 EN61000-4-8, Level 5 EN61000-4-11
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Green product	RoHS

Application

Dimension

Ordering Information

Hot Model	Description
NT-IN321-500	Industrial switch,10/100/1000M, two SC fiber port, dual fiber, MM, 500m, one 1000M Ethernet port, standalone
NT-IN321-20	Industrial switch,10/100/1000M, two SC fiber port, dual fiber, SM, 20km, one 1000M Ethernet port, standalone
NT-SIN321-20	Industrial switch,10/100/1000M, two SC fiber port, single fiber, SM, 20km, one 1000M Ethernet port, standalone
NT-IN321SFP	Industrial switch,10/100/1000M, two LC fiber port, one 1000M Ethernet port, standalone

Contact us if you need more details on Industrial 10/100/1000M Fiber Switch. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Industrial 10/100/1000M SFP Switch、Industrial SFP Port Ethernet Switch. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Industrial Ethernet Switch > Industrial Gigabit Ethernet Switch